| Technical data | KL2612 | KS2612 |
|---|---|
| Number of outputs | 2 x change-over |
| Rated load voltage | 125 V AC/30 V DC |
| Load type | ohmic |
| Max. output current | 2 A |
| Ohmic switching current | 0.5 A AC/2 A DC |
| Inductive switching current | no data |
| Minimum permitted load | 10 µA at 10 mV |
| Lamp test, electronic ballast | max. 2 A starting current |
| Electrical isolation | 500 V (K-bus/field potential) |
| Current consumption power contacts | – (no power contacts) |
| Current consumpt. K-bus | typ. 60 mA |
| Bit width in the process image | 2 outputs |
| Operating cycles mech. (min.) | 1 x 10^8 |
| Operating cycles electr. (min.) | 2 x 10^5 (1 A/30 V DC) |
| Configuration | no address or configuration setting |
| Special features | signal relay |
| Weight | approx. 80 g |
| Operating/storage temperature | 0…+55 °C/-25…+85 °C |
| Relative humidity | 95 %, no condensation |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27/29 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. class/installation pos. | IP 20/variable |
| Pluggable wiring | for all KSxxxx Bus Terminals |
| Approvals | CE, UL, Ex, GL |
