НПП Айдар поставляет промышленное оборудование и электронные компоненты для автоматизации технологических процессов, зданий и сооружений, машиностроительных комплексов.

  

CX8095 | Embedded PC for EtherNet/IP

The CX8095 is a control system with EtherNet/IP slave interface. The EtherNet/IP interface is designed as a 2-port switch for realisation of daisy-chain cabling. K-bus or E-bus terminals can be attached as required; the CX8095 automatically recognises the type of I/O system connected during the start-up phase. The control system is programmed with TwinCAT via the fieldbus interface or the additional Ethernet interface.

 

CX8095

Technical data CX8095
Processor 32 bit, 400 MHz
Flash memory 256 MB microSD (optionally 1 GB, 2 GB or 4 GB)
Internal main memory 64 MB RAM
Protocol EtherNet/IP (slave)
Programming TwinCAT PLC
Programming languages IEC 61131-3
Online change yes
Up/down load code yes/yes
Interfaces 1 x Ethernet 10/100 Mbit/s, 1 x USB device (behind the front flap)
Bus interface 2 x RJ 45 (switched)
I/O connection E-bus (EtherCAT Terminals) or K-bus (Bus Terminals), automatic recognition
Clock internal battery-backed clock for time and date (battery behind the front flap, exchangeable)
UPS 1-second UPS
Operating system Microsoft Windows CE
Web-based management yes
Current supply I/O terminals 2 A
Max. power loss 3 W
Dimensions (W x H x D) 65 mm x 100 mm x 80 mm
Operating/storage temperature 0…+55 °C/-25…+85 °C
Relative humidity 95 %, no condensation
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27/29
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protection class IP 20

 

Опубликовано в Базовый процессорный модуль серии CX8000 (32 bit ARM-based CPU)

Похожие материалы (по тегу)

Наверх
  Яндекс.Метрика